4x1 GigaBit Regeneration Tap

Passive monitoring access for multiple devices

install guide data sheet

Net Optics 4x1 GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit fiber networks. For a complete picture of network health, these Taps connect up to four different network management and security devices at any single GigaBit network location.

One Tap, No Idle Resources

Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability

For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Splitter Specifications:
Split Ratio: 50/50

Fiber Type: GigaBit SX Multimode Corning 62.5µm, wavelength 850nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 4.5 dB

Fiber Type: GigaBit LX Singlemode Corning 8.5µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 3.7 dB

Operating Specifications:
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Redundant Power Supplies: 
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide

Connectors:
(4) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface:
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and
EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length: 850 nm nominal
Output Power: -9.5 dB min, -4 dB max
Optical Receiver Input Sensitivity: 0 dB min, -17 dB max

Optical Transmitter Wave Length: 1310 nm nominal
Output Power: -10 dB min, -3 dB max
Optical Receiver Input Sensitivity: -3 dB min, -20 dB max

Certifications:
Fully RoHS compliant

Part Numbers:
4x1 GigaBit SX Regeneration Tap
RGN-SX-IL4
4x1 GigaBit LX Regeneration Tap
RGN-LX-IL4

 

   Passive, Secure Technology

  

Warranty

  

Ease of Use
 Dotted Lines   Dotted Lines   Dotted Lines
  • Enables real-time, simultaneous monitoring of a single GigaBit link with up to four monitoring devices
  • Provides complete full-duplex visibility at 1000 Mbps without data stream interference or introducing a point of failure
  • Passes all traffic (including errors) from all layers for comprehensive troubleshooting
  • No IP address is needed for the Tap or monitoring device, enhancing monitoring security
  • Redundant power ensures monitoring uptime 
  • Fully IEEE 802.3 compliant
  • Fully RoHS compliantRedundant Power
  
  • All Net Optics products come standard with a 1 year manufacturer's warranty
  • Optional 1 or 2 year extended warranty available at time of product purchase

 

  
  • LED indicators show redundant power, speed, link, and activity status
  • Front-mounted connectors support easy installation and operation
  • Connectors are perfectly angled to reduce cable strain
  • Silk-screened application diagram illustrates all connections for easy deployment
  • Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC
  • Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

 

      4x1 GigaBit SX Regeneration Tap

  

4x1 GigaBit LX Regeneration Tap
Dotted Lines   Dotted Lines

     - RGN-SX-IL4
       Regen, 4x1, IL, Fiber, SX 62.5µm,

       SC, 850nm

  

- RGN-LX-IL4
  Regen, 4x1, IL, Fiber, LX 8.5µm,

  SC, 1310nm