Connectivity
Complete your passive monitoring solution with our full line of converters, redundancy products, test equipment, cables, and more.
- Media converters for mixed link types
- Power chassis' options
- Rack panel frames, and fiber optic cleaning kits
-
P/N: FMC-XFP
Bidirectional media conversion between 10 GigaBit SR and LR devices at 10,000 Mbps. Deploy alone or in pairs to convert media or extend transmission distances.
-
P/N: FMC
Bidirectional media conversion between 100BaseFX singlemode and multimode devices at 100 Mbps. Deploy alone or in pairs to convert media or extend transmission distances.
-
P/N: FMC-LX/SX
Bidirectional media conversion between GigaBit LX and SX devices at 1000 Mbps. Deploy alone or in pairs to convert media or extend transmission distances.
-
P/N: CVT-LX5/GCU
Media conversion and passive monitoring access for GigaBit LX networks. Monitor GigaBit LX networks with a GigaBit copper device.
-
P/N: CVT-SX5/GCU
Media conversion and monitoring access for GigaBit TX networks. Monitor GigaBit SX networks with a GigaBit TX device.
-
P/N: CV-SX/GCU, CV-LX/GCU
Bidirectional media conversion between GigaBit SX and TX devices at 1000 Mbps. Supports both fiber and UTP auto-negotiation.
-
NEW! P/N: 490-0655-001
This 5-meter copper cable connects from one SFP+ slot to another, without the need for SFP+ transceivers. It is an economical solution for interconnecting 10 Gigabit Net Optics products, such as connecting an iLink Agg xStream to a Director xStream or other network equipment that have SFP+ slots.
-
NEW! P/N: 705-0012-001, 705-0013-001, 705-0014-001, 705-0015-001, 705-0016-001, 705-0017-001
These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC-connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap's monitor outputs to plug into two NICs on the monitoring tool.
-
P/N: PWR12-350
24 power leads in a 1U high rack-mountable chassis to support 24 single or 12 redundant power connections for Net Optics 10/100 and GigaBit Taps.
-
P/N: RK-12V2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5” wide taps in a 4U frame.
-
P/N: RK-12
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5” wide taps in a 4U frame.
-
P/N: RK-8V2
Designed specifically for high-density rack-mounting of Net Optics LC fiber Slim Taps. Accommodates eight 4 inch wide taps in a 1U frame.
-
P/N: RK-6V2
Designed specifically for easy rack-mounting of Net Optics Slim Taps. Accommodates six 5.55” wide taps in a 1U frame.
-
P/N: RK-3
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5” wide taps in a 1U frame.
-
P/N: RK-3V2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5” wide taps in a 1U frame.
-
P/N: RK-ITP2
Designed specifically for easy rack-mounting of Net Optics intelligent iTap family of products . Accommodates two 8.75” wide taps in a 1U frame.
-
P/N: RK-2V2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates two 6.5” wide taps in a 1U frame.
-
P/N: RK-2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates two 6.5” wide taps in a 1U frame.
-
P/N: FMC-XFP
Bidirectional media conversion between 10 GigaBit SR and LR devices at 10,000 Mbps. Deploy alone or in pairs to convert media or extend transmission distances.
-
P/N: FMC
Bidirectional media conversion between 100BaseFX singlemode and multimode devices at 100 Mbps. Deploy alone or in pairs to convert media or extend transmission distances.
-
P/N: FMC-LX/SX
Bidirectional media conversion between GigaBit LX and SX devices at 1000 Mbps. Deploy alone or in pairs to convert media or extend transmission distances.
-
P/N: CVT-LX5/GCU
Media conversion and passive monitoring access for GigaBit LX networks. Monitor GigaBit LX networks with a GigaBit copper device.
-
P/N: CVT-SX5/GCU
Media conversion and monitoring access for GigaBit TX networks. Monitor GigaBit SX networks with a GigaBit TX device.
-
P/N: CV-SX/GCU, CV-LX/GCU
Bidirectional media conversion between GigaBit SX and TX devices at 1000 Mbps. Supports both fiber and UTP auto-negotiation.
-
P/N: PWR12-350
24 power leads in a 1U high rack-mountable chassis to support 24 single or 12 redundant power connections for Net Optics 10/100 and GigaBit Taps.
-
P/N: RK-12V2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5” wide taps in a 4U frame.
-
P/N: RK-12
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5” wide taps in a 4U frame.
-
P/N: RK-8V2
Designed specifically for high-density rack-mounting of Net Optics LC fiber Slim Taps. Accommodates eight 4 inch wide taps in a 1U frame.
-
P/N: RK-6V2
Designed specifically for easy rack-mounting of Net Optics Slim Taps. Accommodates six 5.55” wide taps in a 1U frame.
-
P/N: RK-3
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5” wide taps in a 1U frame.
-
P/N: RK-3V2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5” wide taps in a 1U frame.
-
P/N: RK-ITP2
Designed specifically for easy rack-mounting of Net Optics intelligent iTap family of products . Accommodates two 8.75” wide taps in a 1U frame.
-
P/N: RK-2V2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates two 6.5” wide taps in a 1U frame.
-
P/N: RK-2
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates two 6.5” wide taps in a 1U frame.
-
NEW! P/N: 490-0655-001
This 5-meter copper cable connects from one SFP+ slot to another, without the need for SFP+ transceivers. It is an economical solution for interconnecting 10 Gigabit Net Optics products, such as connecting an iLink Agg xStream to a Director xStream or other network equipment that have SFP+ slots.
-
NEW! P/N: 705-0012-001, 705-0013-001, 705-0014-001, 705-0015-001, 705-0016-001, 705-0017-001
These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC-connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap's monitor outputs to plug into two NICs on the monitoring tool.